Overview
The MC1-1D is a manoeuvrable parachute assembly designed by the United States Army in 1988 from the basic MC1-1B canopy. This tried and tested design is used primarily for premeditated jumps where a precision soft landing in a small target area is necessary.
While Aerodyne might utilise some of the main design constructs of the original design. Our engineers have chosen to opt for MIL-C-5040 T2 Low porosity 1.1oz Ripstop Nylon as a Canopy Material.
The stitch itself utilises reinforcement zigzag stitching was added for main seams.
The Difference between Traditional Models MC1-1C & MC1-1D?
MC1-1C: Standard configuration which incorporates a low porosity canopy cloth PIA-C-44378.
MC1-1D: Incorporates the new Universal Static Line with Static Line Snap.
SPECIFICATIONS DATASHEET
DOWNLOAD HERESPECIFICATIONS
ITEM: | MC1-1D |
TYPE PARACHUTE: | 10% Extended Skirt |
STEERABILITY: | Steerable |
NOMINAL DIAMETER: | 35ft (10.7m) |
NUMBER OF GORES: | 30 |
CANOPY MATERIAL: | MIL-C-44378 T1 |
Low Porosity | |
1.1oz Ripston Nylon |
SUSPENSION LINE MATERIAL: | MIL-C-5040 T2 |
SUSPENSION LINE LENGTH: | 22ft (6.7m) |
SUSPENSION LINE TENSILE STRENGTH: | 400lbs (181 kg) |
STATIC LINE: | Universal Static Line (USL) |
STATIC LINE 360°: | 7.7 Sec |
ASSEMBLY WEIGHT: | 29lbs (13kg) |
MAX EXIT WEIGHT: | 360lbs (163kg) |
MAX EXIT SPEED: | 150 KEAS |
OPERATIONAL EXIT ALTITUDE: | 500ft AGL |
RATE OF DESCENT: | |
200lbs | 16ft/s |
300lbs | 19ft/s |
360lbs | 21ft/s |